全世界阻力最小的鏈條 - CeramicSpeed UFO 鏈條更優化 節省 2 - 5 瓦
世界最速競賽級鏈條。在競賽日時，您必需拿出最佳表現，而您的器材更是得處於最佳狀態。CeramicSpeed UFO 競賽級鏈條便是為此特別開發的神兵利器，削除多餘磨擦阻力並激發您的速度。
CeramicSpeed UFO 競賽級鏈條，是在丹麥將高品質鏈條供應商的標準產品進行手工優化。這些超高速競賽級鏈條極度滑順無阻滯，帶來絕無僅有的騎乘體驗及性能優勢。具有 11 速或 10 速規格鏈條，可相容於 SRAM、Campagnolo 及 Shimano 傳動系統，以及登山車、越野車和林道車傳動系統。
僅靠 UFO 競賽級鏈條，即可節省 2 - 5 功秏
CeramicSpeed UFO 競賽級鏈條可以節省您 2 - 5 瓦功耗。若已安裝全套 CeramicSpeed升級組件，( OSPW 系統、五通軸承及輪組培林組 )，再加上優化鏈條總共將可節省 10 - 16 瓦功耗。
特別開發而成的鏈條優化處理製程，歷經多道工序，其使用配方，混合了特殊臘及減阻添加劑，並披覆上 Teflon® 粉末鍍層，與優化配方形成分層，各司其職地組成一低磨擦系統，達到終極的鏈條效率。
充份運用你的 CeramicSpeed UFO 競賽級鏈條
專門為了在競賽日能發揮出極致性能而開發，CeramicSpeed UFO 競賽級鏈條具有 600 公里 / 370 英里的最佳使用里程。超過這個里程後，優化處理的殘餘痕跡，將持續確保您的鏈條，維持在正常標準鏈條的最高水準。為了充份運用您的鏈條，在超過 競賽的里程後，您應正常地維護保養您的鏈條。當您清洗完單車，或是在潮濕且泥濘的路況中騎車之後，必需要保養您的鏈條。我們建議使用 UFO Drip 鏈條潤滑鍍膜來保養您的 CeramicSpeed UFO 競賽級鏈條。
．變速器：Shimano 11S
．專門為了競賽而設計
．幫您節省 2 - 5 瓦特
．保證最低的摩擦阻力減少動力傳導的損失與提升你的表現
．扎實與堅固的鏈條，非常的滑順，可以讓你騎乘起來更順暢
．在丹麥使用蠟和摩擦降低添加劑的混合進行了優化
選擇 CeramicSpeed UFO 競賽級鏈條，並取得無償增速
圖中的紅線表示優化前的 10 速鏈條磨擦力。在經過了 CeramicSpeed UFO 處理後，磨擦力損秏降低至約略 5 瓦左右，與對照組鏈條相比，磨擦力減少了大約 4 瓦。
| Art-No. | 產品名稱 | 顏色 |
| 105641 | Compatible for Shimano 11s, road & MTB | 雪白 |
如何購買？
．請至鄰近 Ceramicspeed 經銷商購買，提供您最前線的專業技術指導與服務，再由店家與我們聯繫，配送至店家，為您省下更多時間。
．經銷商據點查詢：https://www.salloy.com.tw/store.php
．如所需產品款式無提供在選購欄中，可至經銷商與店家下預訂單。
CeramicSpeed UFO 鏈條安裝
Mounting your new optimised chain is no different from the installation of any other chain.
Be aware that the chain is covered with Teflon® powder, which might scatter when taken out of the bag. Use the set of gloves provided in the package and make sure to cover the floor when installing the CeramicSpeed UFO Racing Chain. Always connect the chain with the connecting link provided. We do not recommend reusing the connecting link. To install your chain, a chain tool is required. Shorten the chain at optimal length.
When cutting the chain with the chain tool, remember that the cut needs to be made so that the chain-ends are both inner plates. Attach the two pieces of the connecting link where the link rivet matches the link plate hole, then pull the chain to activate the lock.
Within 600 km/370 miles, to benefit from the full advantages of the CeramicSpeed UFO Racing Chain, you must not wash the chain before the mileage is exceeded. However, if your chain needs cleaning, use a dry cloth or a soft brush and carefully remove the dirt off the chain. When taking the chain off for maintenance or cleaning, remember to reinstall it in the same direction as before. In the case of a mild shower, where the chain has not been exposed to water more than a few minutes, the chain performance properties should not be affected.
In the case of light showers, we recommend applying UFO Drip Chain Coating, after wiping off the excess Teflon powder with a dry cloth, if any left on the chain. Allow the UFO Drip Chain Coating to dry off before riding.
In the case of heavy showers, you should cover your chain in a protective grease on top of the UFO treatment. This will slightly influence the watt savings, but it will protect the chain while still improving your performance.
After 600 km/370 miles the chain may undergo maintenance, keeping in mind that traces of the optimisation are still left on the chain. When using UFO Drip Chain Coating, after the 600 km/370 miles, please follow the instructions on the bottle. Note that the huge watts saving of 2-5 watts is achieved within the first 600 km/370 miles interval and decrease slightly after the UFO treatment wears off.
