SRAM AXS Road 12 速 UFO 競賽級鏈條具有 600 公里 / 370 英里的最佳使用里程，超過這個里程後，優化處理的殘餘痕跡，將持續確保您的鏈條，維持在正常標準鏈條的最高水準。有效節省 25％（ UFO Force 與 stock Force 12S AXS 鏈條 ）。鏈條在丹麥手工優化，包括 SRAM 快速鏈接，可輕鬆進行安裝/拆卸。在潮濕條件下騎行會縮短優化壽命。
Note: This product is expected to be out of stock until Spring 2022. Please find a fully compatible UFO Chain option here for all SRAM AXS group sets that would normally use a Flattop chain.
If you have an SRAM Flattop chain that you prefer to use, you can optimize it directly by using our UFO Drip.
Due to its unique optimization treatment, CeramicSpeed's Ultrafast Racing Chain saves you watts and improves your performance with free speed and unparalleled low friction. Our ultrafast racing chains are carefully selected from high-quality suppliers and optimized by hand in Denmark.
This ultrafast chain has been optimized for SRAM AXS Road 12-speed compatibility, to boost the efficiency of your entire drivetrain.
CeramicSpeed UFO Racing Chains can save you between 2–5 watts on a distance of 650 km/400 miles. Apply CeramicSpeed UFO Drip after 650km to maintain your peak chain optimization over the life of the chain.
Be aware that the UFO treatment is not optimized for wet and muddy conditions, which might cause corrosion on the chain. Read more about this in the maintenance tab.
View test data here.
In The Box
| Art-no. | 規格 | 顏色 |
| 107529 | Compatible for SRAM AXS Road Flatback 12s | 白 |
Compatibility: SRAM 12-speed AXS Force and Red
Chain Length: 114 links
Speed: 12-speed
Discipline: Road
NB: The optimized chain is an original SRAM Force Flattop chain.
如何購買？
．請至鄰近 Ceramicspeed 經銷商購買，提供您最前線的專業技術指導與服務，再由店家與我們聯繫，配送至店家，為您省下更多時間。
．經銷商據點查詢：https://www.salloy.com.tw/store.php
．如所需產品款式無提供在選購欄中，可至經銷商與店家下預訂單。
CeramicSpeed UFO 鏈條安裝
Mounting your new optimised chain is no different from the installation of any other chain.
Be aware that the chain is covered with Teflon® powder, which might scatter when taken out of the bag. Use the set of gloves provided in the package and make sure to cover the floor when installing the CeramicSpeed UFO Racing Chain. Always connect the chain with the connecting link provided. We do not recommend reusing the connecting link. To install your chain, a chain tool is required. Shorten the chain at optimal length.
When cutting the chain with the chain tool, remember that the cut needs to be made so that the chain-ends are both inner plates. Attach the two pieces of the connecting link where the link rivet matches the link plate hole, then pull the chain to activate the lock.
Within 600 km/370 miles, to benefit from the full advantages of the CeramicSpeed UFO Racing Chain, you must not wash the chain before the mileage is exceeded. However, if your chain needs cleaning, use a dry cloth or a soft brush and carefully remove the dirt off the chain. When taking the chain off for maintenance or cleaning, remember to reinstall it in the same direction as before. In the case of a mild shower, where the chain has not been exposed to water more than a few minutes, the chain performance properties should not be affected.
In the case of light showers, we recommend applying UFO Drip Chain Coating, after wiping off the excess Teflon powder with a dry cloth, if any left on the chain. Allow the UFO Drip Chain Coating to dry off before riding.
In the case of heavy showers, you should cover your chain in a protective grease on top of the UFO treatment. This will slightly influence the watt savings, but it will protect the chain while still improving your performance.
After 600 km/370 miles the chain may undergo maintenance, keeping in mind that traces of the optimisation are still left on the chain. When using UFO Drip Chain Coating, after the 600 km/370 miles, please follow the instructions on the bottle. Note that the huge watts saving of 2-5 watts is achieved within the first 600 km/370 miles interval and decrease slightly after the UFO treatment wears off.
