培林清潔劑 - 
UFO Clean Bearings
CeramicSpeed UFO Clean 軸承油脂清潔劑，徹底清除軸承內的油脂和污垢。 有效分解油脂，並且輕鬆清潔中軸、輪組軸承、碗組軸承和導輪軸承。
這是一種無毒且可生物降解的配方——環保且安全。
靜置3-5分鐘後，後使用風槍清除殘留髒污。
| Art-No. | 產品規格 |
| 110257 | 100ml |
| 110053 | 1L |
如何購買？
．請至鄰近 Ceramicspeed 經銷商購買，提供您最前線的專業技術指導與服務，再由店家與我們聯繫，配送至店家，為您省下更多時間。
．經銷商據點查詢：https://www.salloy.com.tw/store.php
．如所需產品款式無提供在選購欄中，可至經銷商與店家下預訂單。
| 1650 |
Please note the new updated bottle comes with a precision nozzle instead of a pipette for easier storage and shipping.
Preparation
When possible, standard maintenance can and should be done without removing the bearings from their cup, frame bore, or hub shell. This will limit potential stress or impact damage from knocking out the bearings and reinstalling.
For cranks, remove the cranks, any spacers, and dust covers.
For hubs, follow the hub/wheel manufactures instructions for removing axel end caps and/or dust covers to access the face of the bearings.
With the face of the bearing visible, use a knife edge or flat pick to lift off the bearing seal starting on the inner lip (at the inner race) and carefully lifting up. Small, smooth movements will help prevent damaging the seal during removal. Once the seal is removed, wipe both sides clean, ensure it is completely flat, and set aside. You should now have access to the individual balls inside of the bearing. Using a cloth or shop rag, wipe away grease on the face of the bearing, revealing the balls. If you see a solid ring, you are looking at the back of the bearing. There is no direction to the performance of the bearing, but cleaning and maintenance are easier and more efficient when performed from the face/front of the bearing. You may choose to turn the bearing around at this time to allow adequate cleaning and ease of future maintenance.
Normal cleaning
To flush and clean CeramicSpeed bearings, UFO Clean Bearings was developed as a non-toxic easy to use bearing cleaner. Use the nozzle to add a few drops of cleaner into each bearing (Approx. 0,5 – 2,0mL dependent on the bearing size). Rotate the bearing to cause an ‘agitation’ effect inside the bearing.
After soaking for 3-5 minutes, use compressed air to flush out the grease and contamination. Repeat this process a second time if needed to fully clean the bearing. Once the bearing is visually cleaned out and rotates smoothly, allow the bearing to air dry prior to applying fresh grease. Follow grease selection and application guide at the bottom of this document for best performance and longevity. Once grease is applied, reinstall the face seal by laying it on the bearing (the all-rubber side should face out) and evenly pressing it into the groove on the outer race. The seal should sit flat and even on the bearing. Be sure to take careful note of the direction on any dust covers when reassembling the parts.
